General Information; Wall Mounting Instructions - Dimplex Saletto LPP050E Instruction Manual

General Information

Please read the instructions closely before first using the product, there is also a
quick-start guide on page 8 if you need a reminder of how to use the basic functions
in the future. The heater is designed for wall mounting using the wall bracket supplied.
It should only be operated when in the upright position as shown - see Fig.3 and Fig.4.
All models are splash proof to IP24. Before connecting the heater check that the supply
voltage is the same as that stated on the heater.

Wall Mounting Instructions

IMPORTANT - The wall bracket
supplied with the heater must
be used and the heater must
be installed in the correct
orientation. The fixings should
be used to secure the bracket to
the particular wall on which the
heater will be installed. The heater
should be positioned observing
the minimum clearances stated
around the heater - see Fig. 2,
Fig. 3 and Fig. 4.
'B'
Minimum
mounting
clearance
8
MODEL
LPP050E
LPP075E
LPP100E
LPP150E
250
mm
Minimum mounting clearance
WARNING:
This product is heavy and care
should be taken in installation
A B C
672mm 150mm 746mm 235mm 100mm
672mm 150mm 746mm 235mm 100mm
803mm 150mm 877mm 235mm 100mm
1068mm 150mm 1142mm 235mm 100mm
D E
Fig. 2