General Information; Wall Mounting Instructions - Dimplex Monterey Instruction Manual

General Information

Please read the instructions closely before fi rst using the product, there is also a quick-
start guide on page 8 if you need a reminder of how to use the basic functions in the
future. The heater is designed for wall mounting using the wall bracket supplied. It
should only be operated when in the upright position as shown - see Fig.3 and Fig.4.
All models are splash proof to IP24. Before connecting the heater check that the supply
voltage is the same as that stated on the heater.

Wall Mounting Instructions

IMPORTANT - The wall bracket
supplied with the heater must
be used and the heater must
be installed in the correct
orientation. The fi xings should
be used to secure the bracket to
the particular wall on which the
heater will be installed. The heater
should be positioned observing
the minimum clearances stated
around the heater - see Fig. 2,
Fig. 3 and Fig. 4.
Minimum
mounting
clearance
300
mm
255
mm
8
MODEL A
MFP050E 390mm 150mm 503mm 536mm
MFP075E 390mm 150mm 503mm 536mm
MFP100E 560mm 150mm 671mm 536mm
MFP150E 630mm 150mm
MFP200E 800mm 150mm
WARNING:
This product is heavy and care
should be taken in installation
B C D
741mm 536mm
911mm 536mm
E
104mm
104mm
104mm
104mm
104mm
Fig. 2