Dimplex Saletto LPP050E Instruction Manual page 21

Accessing Runback Lock Mode
In order to enter the Runback Lock menu; Back, Menu
& Enter must be pressed simultaneously and held for
10 seconds. The user will then be prompted to enter
the runback lock PIN.
NOTE
The default PIN code is 0000, the
password can be changed from within
the runback lock mode menu.
Enabling runback timer mode
From the main Runback lock menu select Runback, and
then Enable using Enter. Runback mode will be enabled,
normal functionality of the appliance will be disabled
allowing only the Runback mode functionality.
Disabling runback timer mode
From the main Runback lock menu select Runback and
Disable and confirm using Enter. Runback mode will be
disabled and full appliance functionality will be enabled.
Runback Mode Settings
Changing the PIN code
It is possible to set a user defined runback lock PIN code. Once changed, the PIN code
will be required to access the runback timer mode menus.
To change the PIN code select "Change code" from the main Runback lock menu.
To complete the change, follow the on-screen instructions, it will be necessary to input
the current PIN and then set the new PIN code.
12:00
Comfort Off
:
Runback
Disable
Enable
Settings
Runback lock
Enter code
0000
12:00
Comfort
Off
Advanced
Runback Lock
SP Config
Runback lock
Enter code
0000
Runback lock
Change code
Runback
Setback
Max Temp
Runback lock
Changecode
Runback
Setback
Max Temp.
21