General Information
Please read the instructions closely before fi rst using the
The heater is designed for wall mounting using the wall bracket supplied. It should only be operated
when in the upright position as shown - see Fig.3 and Fig.4. All models are splash proof to IP25
standard and may be used in bathrooms. Before connecting the heater check that the supply
voltage is the same as that stated on the heater.
Wall Mounting Instructions
IMPORTANT - The wall bracket supplied with the heater must be used and the heater must
be installed in the correct orientation. Appropriate fi xings should be used to secure the bracket
to the particular wall on which the heater will be installed. The heater should be positioned
observing the minimum clearances stated around the heater - see Fig. 2, Fig. 3 and Fig. 4.
DO NOT locate the heater immediately below a fi xed socket outlet or connection box.
6
Fig. 1
Minimum mounting clearance
product.
Fig. 2
800
mm
374
mm