Table of Contents
Advertisement
Child Lock
If you need to lock the controls so that the settings cannot be changed then activate
the Child Lock.
To lock the controls press Back and Enter for three seconds.Child Lock will appear
at the bottom of the screen. To unlock the control repeat the action of pressing Back
and Enter for three seconds.
NOTE
:
The controls cannot
be adjusted when
child lock is active.
User Information
User Information
Press and hold Enter for five seconds to display the User Information menu;
,
Runback
when enabled, allows the user to activate a timed heating period by pressing
the Advance button when the appliance is in Standby mode. The settings of the timed
heating period, duration and temperature can be configured in Runback Settings.
Runback is enabled by default.
Temp Settings allows the user to select the Max Temp to adjust the maximum temperature
range of the appliance. Setback allows the user to select a background temperature
setting when the product is not in a Timer Mode Comfort On period.
Open Window detection (OW), when enabled, allows the heater to reduce the target
room temperature, limiting energy waste. Enabled as default when an open window
is detected.
EcoStart (ES) - to achieve the desired temperature at the onset of the timed Comfort
On period, the appliance anticipates when it needs to start heating prior to the onset
of the timed on period. E.g. room is 16°C, with 21°C at 7am set on the timer. With ES
On the control will start to heat the room before 7am, reaching 21°C at this time. With
ES off the heater will start to heat the room at 7am and will reach 21°C after this time.
Factory Reset returns all settings to the factory presets.
Child Lock
User Info
Runback
Temp Settings
Open Window
Eco Start
Factory Reset
19
Advertisement
Table of Contents
