Dimplex Saletto LPP050E Instruction Manual page 20

Runback Lock Mode
Introduction
This appliance has a built in runback lock mode, when this
mode is activated the user will have limited functionality
with no access to the settings of the runback timer. It is
possible to limit the maximum operating temperature and
runback duration in the runback lock mode. This mode
also features a setback function where a non-adjustable
setback temperature can be set.
Operation in Runback mode
When runback mode is active the appliance settings
are locked, it is only possible for the user to activate
predetermined runback periods. During these periods the
appliance will energise to control the room to a desired
temperature. During a runback period the set-point can
be adjusted by the user however, it is possible to assign a
maximum set-point limit during the runback mode setup.
Once the runback period has elapsed the appliance will
switch into Comfort off mode or into setback mode if
enabled.
To activate a runback period the user must press the
Advance button. There will be four runback periods
available to chose from which are accessible through
sequential presses of the Advance button. A subsequent
press of the Advance button will return the appliance to
Comfort off mode or Setback mode.
20
12:00
Comfort
Off
Runback
30 Minutes
Comfort
On
Runback
60 Minutes
Comfort
On
Runback
90 Minutes
Comfort
On
Runback
120 Minutes
Comfort On
12:00
Comfort
Off