Dimplex Saletto LPP050E Instruction Manual page 10

Quick Start Guide
This guide is for quick reference only.
Please refer to the operating section on Page 12 for further information.
How Does the Heater Control Work?
The controller allows you to choose when you want heat and at what temperature.
When using a timer mode (see below), Comfort On will display on the home screen to
tell you when the heater is maintaining the temperature displayed. Comfort Off will
display when the heater is outside of a timed heating period. When Manual, Eco or
Frost modes are being used the heater will always maintain the temperature shown
on the home screen.
Set the Time
To set the date and time on the heater, press Menu, then press Enter with Time / Date
highlighted. Press
and move onto the next value. Repeat until all details are correct, and Set displays,
then press Back. The time is automatically adjusted in spring and autumn between
Greenwich Mean Time (GMT) and British Summer Time (BST).
Set the Temperature
The temperature shown on the display is the room temperature set point (target
room temperature). This is the temperature that the heater will maintain during the
heating periods. If the room temperature is above this temperature then the heater
will not operate. The heater leaves the factory with this temperature set at 21°C which
represents a typical, comfortable room temperature. If you require a different room
temperature, use either
Timer Modes
Your Dimplex LPPE Panel
comes pre-programmed
with four timer modes. These
modes define the periods
when the heater will operate
in Comfort On mode. The four
modes are shown in Fig.5
Which Timer Mode is Best for Me?
The heater leaves the factory set in Out All Day mode. If you are out during the day
and only require heat in the mornings and evenings then this mode will likely suit your
lifestyle.
If you are in during the day then you should select the Home All Day mode which is
a single heating period.
10
until the correct value is shown, then press Enter to confirm
or
or until the display shows the temperature you require.
Timer Mode
Out All Day
Home All Day
Description
User timer Customise times in four periods
6 hours heating per day in two
periods
13 hours heating per day in one
period
Set the temperature and number
Holiday
of days for which you are on
holiday
Fig. 5