Table of Contents
Advertisement
General Information
Your Dimplex Ceramic Radiant Heater uses ceramic elements which produce a high
proportion of their output in the long-wave infra-red. This provides a high comfort
factor – similar to the natural energy from the sun.
Model No.
CXD2000VE
CXD2000HE
Location
T
he position of the heater(s) should be such as to allow an even and uninterrupted
distribution of radiation to the area(s) to be heated. Heaters are most effective when
the beam angle is inclined down at an angle of 30º to 45º to the vertical.
Mounting
Heaters are supplied with an integral wall bracket which may be fixed through
the mounting holes to any suitable structure. The bracket allows the heater to be
inclined at the required angle. The recommended fixing height to the centre line of
the bracket is 2.0m from ground level - see Fig. 5.
The integral wall fixing bracket may be removed by fully unscrewing to facilitate
its fixing.
The position of the heater(s) should be such as to allow an even and uninterrupted
distribution of radiation to the area(s) to be heated. Heaters are most effective
when the beam angle is inclined down at an angle of between 30º to 45º to the
vertical - see Fig. 5.
When deciding upon the best location, consideration must be given to the following
requirements:
a. Avoid structures which might vibrate e.g. crane gantries. These could adversely
affect element life.
b. Comfort and safety could be compromised unless the heater is mounted at or
above 1.8m from ground level.
c. Allow a minimum of 500mm minimum clearance between the top of the heater
and any horizontal surface - see Fig. 4.
d. Ensure flammable materials, fabrics, etc. are kept at least 3.5 meters away from
the product when mounting and at all times.
12
No. of Lamps
2
2
Rating
Voltage
(kW)
(V)
2.0
230-240
2.0
230-240
Weight
(kg)
5.5
5.2
Advertisement
Table of Contents
