Dimplex Saletto LPP050E Instruction Manual page 17

In Holiday mode the number of days that the room will remain unoccupied for can
be adjusted together with the required room temperature.
Press and to choose a holiday period between 1 and 255 days, then press the
Enter button.
Press and to choose a temperature to be maintained during this period and press
the Enter button. At the end of the Holiday mode the heater will automatically revert
back to the previously selected programme.
NOTE
:
If the EcoStart is enabled the heater will maintain the room
at the required temperature for the duration of the heating
period. To achieve this, the heater will begin heating the
room before the start of the heating period to ensure the
room is at the required temperature when the period starts.
If EcoStart (ES) is disabled, the heater will not operate until
the beginning of the heating period. This should be taken
into consideration when setting the heating periods.
See page 19 for instruction on enabling/disabling EcoStart.
Advance
The Advance function allows the active timer schedule to be changed temporarily. When
a timer has been selected, the Advance function is used to begin the next Comfort
On mode early. If the heater is in Comfort Off mode and heat is required, press the
Advance button.
If the heater is in Comfort On and heat is not required, press the Advance button and
the heater and the heater will stop heating until the beginning of the next Comfort
On period.
If the heater is in Manual, Eco Mode or Frost Protect, pressing the Advance button
will pause that operation. The heater will remain paused until the Advance button is
pressed again.
Advance
Home All Day
Comfort On
17