Setting The Default Gateway; Setting The Tftp Gateway Ip Address - Cabletron Systems 6H133-37 User Manual

Chapter 5: Local Management

5.15.3 Setting the Default Gateway

If the SNMP management station is located on a different IP subnet than
the 6H123-50 and 6H133-37, a default gateway must be specified. When
an SNMP Trap is generated, the 6H123-50 and 6H133-37 sends the Trap
to the default gateway.
To set the default gateway, perform the following steps:
1. Use the arrow keys to highlight the Default Gateway field.
2. Enter the IP address of the default gateway using the DDN format.
For example: 134.141.79.121
3. Press ENTER. If the default gateway entered is a valid format, the
cursor returns to the beginning of the Default Gateway field. If the
entry is not valid, the Event Message Line displays "INVALID
DEFAULT GATEWAY OR FORMAT ENTERED". Local
Management does not alter the current value, but it does refresh the
Default Gateway field with the previous value.
4. Use the arrow keys to highlight the SAVE command.
5. Press ENTER. The Event Message Line at the top of the screen
displays "SAVED OK".

5.15.4 Setting the TFTP Gateway IP Address

If the network TFTP server is located on a different IP subnet than the
6H123-50 and 6H133-37, a Gateway IP address should be set. To set the
TFTP Gateway IP address, perform the following steps:
1. Use the arrow keys to highlight the TFTP Gateway IP Addr field.
2. Enter the IP address of the TFTP gateway using the DDN format.
For example: 134.141.80.122
3. Press ENTER. If the TFTP gateway IP address entered is a valid
format, the cursor returns to the beginning of the TFTP Gateway IP
Address field. If the entry is not valid, the Event Message Line
displays "INVALID TFTP GATEWAY IP ADDRESS OR FORMAT
ENTERED". Local Management does not alter the current value, but
it does refresh the TFTP Gateway IP Address field with the previous
value.
5-48 6H123-50 and 6H133-37 User's Guide