Changing Source And Destination Ports - Cabletron Systems 6H133-37 User Manual

5.11.2 Changing Source and Destination Ports

Add or delete source/destination module and port entries as follows:
1. Use the arrow keys to highlight the Source Module field.
2. Press the SPACE bar or BACKSPACE one or more times to increment
or decrement the module number displayed in the brackets [n] until the
appropriate module number displays.
3. Use the arrow keys to highlight the Source Port field.
4. Press the SPACE bar or BACKSPACE one or more times to increment
or decrement the port number displayed in the brackets [n] until the
appropriate port number displays.
5. Use the arrow keys to highlight the Destination Module field.
6. Use the SPACE bar or BACKSPACE to step to the appropriate
module number for the destination module.
7. Use the arrow keys to highlight the Destination Port field.
8. Use the SPACE bar or BACKSPACE to step to the appropriate port
number for the destination port.
9. Use the arrow keys to highlight the Errors field.
10. Press the SPACE bar to select ON or OFF, then press ENTER. ON
forces the source module and port to forward errored frames to the
destination module and port. OFF forces the errored frames to be
dropped before forwarding traffic.
11. Use the arrow keys to highlight the Status field.
12. Use the SPACE bar to select either the ADD or DEL (delete) option.
Press ENTER. This adds or deletes the port selections made in steps 2
and 4 and also updates the screen Source Port and Destination Port list.
If more than one port is to be redirected, repeat steps 1 through
NOTE
6 for each additional setting, then go to step 7 to save all the
new settings at once.
6H123-50 and 6H133-37 User's Guide
Port Redirect Function Screen
5-35