Setting The Default Gateway; Setting The Default Interface - Cabletron Systems HSIM-W6 User Manual
Cabletron systems user's guide hsim-w6
Hide thumbs
Also See for HSIM-W6:
- Installation manual (92 pages) ,
- User manual (194 pages) ,
- Configuration manual (164 pages)
Table of Contents
Advertisement
Chapter 7: General Configuration Using Local Management
2.
Enter the Subnet Mask using Dotted Decimal Notation (DDN) format. Values for each decimal
can be from 0 to 255.
For example: 255.255.0.0
3.
Press ENTER. If the subnet mask entered was a valid format, the cursor returns to the beginning
of the Subnet Mask field. If the entry was not valid, the Event Message field displays
"INVALID SUBNET MASK OR FORMAT ENTERED". Local Management does not alter
the current value and refreshes the Subnet Mask field with the previous value.
4.
Use the arrow keys to highlight the SAVE command field.
5.
Press ENTER. The Event Message field at the top of the screen displays "SAVED OK".
Setting the Default Gateway
To set the default gateway, perform the following steps:
1.
Use the arrow keys to highlight the Default Gateway field.
2.
ENTER the IP address of the default gateway using DDN format.
For example: 134.141.79.121
3.
Press ENTER. If the default gateway address entered was a valid format, the cursor returns to
the beginning of the Default Gateway field. If the entry was not valid, the Event Message field
displays "INVALID DEFAULT GATEWAY OR FORMAT ENTERED". Local Management
does not alter the current value and refreshes the Default Gateway field with the previous value.
4.
Use the arrow keys to highlight the SAVE command field.
5.
Press ENTER. The Event Message field at the top of the screen displays "SAVED OK".
Setting the Default Interface
To set the default interface, perform the following steps:
1.
Use the arrow keys to highlight the Default Interface field.
2.
ENTER the interface number for the default gateway in this field.
3.
Press ENTER. If the interface entered was a valid format, the cursor returns to the beginning of
the Subnet Mask field. If the entry was not valid, the Event Message field displays
"PERMISSIBLE RANGE: 1...1". Local Management does not alter the current value and
refreshes the Default Interface field with the previous value.
130
HSIM-W6 User's Guide
Advertisement
Table of Contents
Troubleshooting
