Changing The Room Temperature For A Few Hours Only; Making Changes With; Setting Party Mode - Viessmann VITOTROL 100 Operating Instructions For The System User

Changing the room temperature for a few days...
2. Press twice.
3. Select "Holiday" with / .

Changing the room temperature for a few hours only

You can change the room temperature
for a few hours without permanently
altering the settings.
The modified temperature remains ena-
bled until the next changeover within a
program or until the next program
change.
If you want to raise the room tempera-
ture unexpectedly:
■ In programs "Prog 1" to "Prog 3" and
"Manual", increase the room temper-
ature with (see next chapter).
or
■ Press g to select party mode (only in
programs "Prog 1" to "Prog 3"; see
page 17).

Making changes with /

1. Press / .
The current set temperature will be
displayed.
2. Set the required temperature with /
.

Setting party mode

In party mode, the room temperature is
increased automatically to 21 °C.
During party mode, you can change the
room temperature to suit your require-
ments.
4. Confirm with OK.
5. Select "OFF" with / .
If you want to reduce the room temper-
ature unexpectedly:
■ In programs "Prog 1" to "Prog 3" and
"Manual", reduce the room tempera-
ture with (see next chapter).
or
■ Press û to select economy mode
(only in programs "Prog 1" to
"Prog 3"; see page 18).
3. The value is accepted automatically
after approx. 5 s.
Note
DHW heating is ON.
1. Press g for approx. 5 s.
The display shows Þ.
Central heating
(cont.)
17