Changing The Room Temperature For A Few Hours Only - Viessmann VITOTROL 100 Operating Instructions For The System User

Changing the room temperature for a few days...
During the holiday program, you can
change the reduced room temperature
to suit your requirements (see
page 14).
Note
DHW heating is switched off.
1. Open the flap.
2. Press twice.
3. With / select "Holiday".
4. Confirm with OK.
5. With / select "ON".
6. Confirm with OK.
7. With / select the required day and
time for start and end of the holiday
program.

Changing the room temperature for a few hours only

You can change the room temperature
for a few hours without permanently
altering the settings.
The modified temperature remains ena-
bled until the next changeover within a
program or until the next program
change.
8. Confirm respectively with OK.
Terminating the holiday program
■ The holiday program terminates auto-
matically when the end time has been
reached.
■ If you want to delete the holiday pro-
gram early:
1. Open the flap.
2. Press twice.
3. With / select "Holiday".
4. Confirm with OK.
5. With / select "OFF".
If you want an unscheduled rise in the
room temperature:
■ In programs "Prog 1" to "Prog 3" and
"Manual", increase the room temper-
ature with (see next chapter).
or
■ Press g to select party mode (only in
programs "Prog 1" to "Prog 3") see
page 18).
Central heating
(cont.)
17