Rooms are too cold
Cause
Vitotrol 100 is incorrectly set.
The wireless connection to the boiler con-
trol unit has failed.
Note
For further causes, see the boiler oper-
ating instructions.
Rooms are too hot
Cause
The Vitotrol 100 is incorrectly set.
The wireless connection to the boiler con-
trol unit has failed.
Note
For further causes, see the boiler oper-
ating instructions.
There is no hot water
Cause
The Vitotrol 100 is incorrectly set.
The wireless connection to the boiler con-
trol unit has failed.
Remedy
Check settings and correct if required:
■ Program (see page 11)
■ Room temperature (see page 14)
■ Time (see page 23)
Change the address code (see
page 30).
Remedy
Check settings and correct if required:
■ Program (see page 11)
■ Room temperature (see page 14)
■ Time (see page 23)
Change the address code (see
page 30).
Remedy
Check settings and correct if required:
■ Starting DHW heating (see page 19)
■ Program (see page 21)
■ Operating mode (see page 19)
■ Time (see page 23)
Change the address code (see
page 30).
What to do if...
27