Preparing For Installation; Installation Location For Weather-Compensated Mode; Installation Location For Room Temperature-Dependent Mode; Specifications - Viessmann VITOTROL 100 OT Installation & Service Instructions Manual

Preparing for Installation

Installation Location for Weather-Compensated Mode

The device can be installed anywhere in the room.

Installation Location for Room Temperature-Dependent Mode

• On an internal wall in the main living room, approx. 1.5m above the floor
• Not next to windows or doors
• Not above radiators
• Not between shelves, in tight spaces etc.
• Not near heat sources (direct isolation, fireplace, TV, etc.)
Note: Do not install further control devices in the main living room. If the radiators are equipped with
thermostatic valves, these must always be fully open.

Specifications

Power Supply
IP Rating
Protection Class
Power Reserve
Accuracy
Via OpenTherm
IP 20 to EN 60529
II to EN 60730-1 subject to correct installation
4 hours
≤ 1 s/day at 20˚C
Preparing Installation 3