Changing the room temperature for a few days only
Setting the holiday program
For when you are away, the following energy saving
options are available:
You can shut central heating down completely by
■
selecting frost protection mode "Frost pr." (see
page 8).
or
You can set the central heating to minimum energy
■
consumption (e.g. to prevent your house plants from
being damaged by the cold). To do so, select the hol-
iday program "
".
j
When the holiday program is enabled, the rooms are
heated with the reduced room temperature
("Reduced").
During the holiday program, you can change the
reduced room temperature to suit your requirements
(see page 9).
Note
DHW heating is switched off.
1. Open the flap.
2. Press
twice.
3. With / select "Holiday".
4. Confirm with OK.
Changing the room temperature for a few hours only
You can change the room temperature for a few hours
without permanently altering the settings.
The modified temperature remains enabled until the
next changeover within a program or until the next pro-
gram change.
If you want an unscheduled rise in the room tempera-
ture:
In programs "Prog 1" to "Prog 3" and "Manual",
■
increase the room temperature with
chapter).
or
Press
to select party mode (only in programs
■
g
"Prog 1" to "Prog 3") see page 11).
Making changes with /
1. Press / .
The current set temperature will be displayed.
2. Set the required temperature with / .
Setting party mode
In party mode, the room temperature is increased
automatically to 21
C.
°
5. With / select "ON".
6. Confirm with OK.
7. With / select the required day and time for start
and end of the holiday program.
8. Confirm respectively with OK.
Terminating the holiday program
The holiday program terminates automatically when
■
the end time has been reached.
If you want to delete the holiday program early:
■
1. Open the flap.
2. Press
3. With / select "Holiday".
4. Confirm with OK.
5. With / select "OFF".
If you want an unscheduled reduction in the room
temperature:
In programs "Prog 1" to "Prog 3" and "Manual",
■
reduce the room temperature with
ter).
or
Press
■
"Prog 1" to "Prog 3") see page 12).
(see next
3. The value is automatically adopted after approx.
5 seconds.
During party mode, you can change the room tempera-
ture to suit your requirements.
twice.
to select economy mode (only in programs
û
Central heating
(see next chap-
11