What to do if...
Changing the address code
Wireless receiver on the boiler
A
8
Q ë r w
A LED
1. Press B on the wireless receiver for
approx. 10 s until LED r flashes.
2. Open the flap of the Vitotrol 100.
3. Press
twice.
4. Select "Settings" with / .
5. Confirm with OK.
6. Select "Service" with / .
7. Confirm 3 times with OK.
8. Select "Address code" with / .
9. Confirm with OK.
After approx. 30 s the display shows
"Transmitting".
The transmission takes approx.
30 s.
During the transmission, LED
flashes briefly.
30
Once the address code is recognised,
the LEDs extinguish; otherwise repeat
the procedure.
B