Changing The Room Temperature For A Few Days Only; Setting The Holiday Program - Viessmann VITOTROL 100 Operating Instructions For The System User

Central heating
Setting a permanent room temperature
06. Confirm with OK.
07. Select the program you want to
change with / (e.g. "Prog 1").
08. Confirm with OK.
09. Select "Heating circuit" with / .
10. Confirm with OK.
11. Select "Copy from" with / .

Changing the room temperature for a few days only

Setting the holiday program

For when you are away, the following
energy saving options are available:
■ You can shut central heating down
completely by selecting frost protec-
tion mode "Frost pr." (see page 13).
or
■ You can set central heating to mini-
mum energy consumption (e.g. to pre-
vent your house plants from being
damaged by cold). For this, select the
holiday program "j".
When the holiday program is enabled,
the rooms are heated with the reduced
room temperature ("Reduced").
During the holiday program, you can
change the reduced room temperature
to suit your requirements (see
page 14).
Note
DHW heating is OFF.
1. Open the flap.
16
(cont.)
12. Confirm with OK.
13. Select the program you want to copy
with / .
14. Confirm with OK.
15. Select "Set" to make changes with
/ .
2. Press twice.
3. Select "Holiday" with / .
4. Confirm with OK.
5. Select "ON" with / .
6. Confirm with OK.
7. With / select the required day and
time for start and end of the holiday
program.
8. Confirm respectively with OK.
Terminating the holiday program
■ The holiday program terminates auto-
matically when the end time has been
reached.
■ If you want to delete the holiday pro-
gram early:
1. Open the flap.