Changing The Room Temperature For A Few Hours Only; Using / To Make Adjustments; Setting Party Mode; Setting Economy Mode - Viessmann VITOTROL 100 Operating Instructions Manual

Central heating
Changing the room temperature for a few days...
5. Use / to select "OFF".

Changing the room temperature for a few hours only

The following functions enable you to change the room
temperature for a few hours without permanently alter-
ing your settings.
The modified room temperature remains enabled until
the next changeover within a program or until the next
switch to a different program.
If you want an unscheduled increase in room tempera-
ture:
In programs "Prog 1" to "Prog 3" and "Manual",
■
you can increase the room temperature with .
or
■ In programs "Prog 1" to "Prog 3", select party
mode by pressing .
g

Using / to make adjustments

1. Press or .
The current set room temperature is displayed.
2. Use / to set the required temperature.

Setting party mode

In party mode, the reduced room temperature is auto-
matically set to 21 °C.
1. Press for approx. 5 s.
g
The display shows .
2. Use / to set the room temperature for party
mode.

Setting economy mode

In economy mode, the set room temperature is auto-
matically reduced.
You can set economy mode during reduced mode
"Eco" and "Reduced".
The lowest room temperature in economy mode is
10 °C.
1. Press for approx. 5 s.
û
The display shows
2. Use / to set the room temperature for economy
mode.
3. Confirm with OK.
14
.
û
(cont.)
If you want an unscheduled reduction in room temper-
ature:
■ In programs "Prog 1" to "Prog 3" and "Manual",
you can lower the room temperature with
or
■ In programs "Prog 1" to "Prog 3", select economy
mode by pressing .
û
3. Confirm with OK or wait approx. 5 s until the value
is adopted automatically.
3. Confirm with OK.
Ending party mode
■ Party mode ends automatically at changeover to the
next time phase of the time program.
■ Press again for approx. 5 s if you want to termi-
g
nate party mode early.
Ending economy mode
■ Economy mode ends automatically at changeover to
the next time phase of the time program.
Press again for approx. 5 s if you want to termi-
■
û
nate economy mode early.
.
v