Renaming Programs; Temperature Adjustment - Viessmann VITOTROL 100 Operating Instructions For The System User

Further adjustments

Renaming programs

You can individually rename programs
"Prog 1" to "Prog 3". The designation
is limited to 5 characters.
01. Open the flap.
02. Press twice.
03. Select "Settings" with / .
04. Confirm with OK.
05. Select "Programs" with / .
06. Confirm with OK.

Temperature adjustment

The displayed room temperature can
deviate from the actual room tempera-
ture if your Vitotrol 100 is installed in an
unfavourable position, e.g. on an exter-
nal wall or near a chimney. You can cor-
rect this temperature deviation with an
adjustment.
Example:
The room temperature displayed by the
Vitotrol 100 is 2 ºC higher than the actual
room temperature. The correction is then
−2 ºC.
01. Open the flap.
02. Press twice.
24
07. With / select the program you
want to rename (e.g. "Prog 1").
08. Confirm twice with OK.
09. Select "Rename" with / .
10. Confirm with OK.
11. With / enter the required charac-
ters on line "New name".
12. Confirm respectively with OK.
03. Select "Settings" with / .
04. Confirm with OK.
05. Select "Service" with / .
06. Confirm with OK.
07. With OK select the required value to
be set for "Ctrller offset".
08. Set the required value with / .
09. Confirm with OK.
10. Exit the menu with .