Changing The Room Temperature For A Few Hours Only - Viessmann VITOTROL 100 Operating Instructions For The System User

Central heating
Changing the room temperature for a few days...
1. Open the flap.
2. Press twice.
3. With / select "Holiday".
4. Confirm with OK.
5. With / select "ON".
6. Confirm with OK.
7. With / select the required day and
time for start and end of the holiday
program.
8. Confirm respectively with OK.

Changing the room temperature for a few hours only

You can change the room temperature
for a few hours without permanently
altering the settings.
The modified temperature remains ena-
bled until the next changeover within a
program or until the next program
change.
If you want an unscheduled increase in
room temperature:
■ In programs "Prog 1" to "Prog 3"
and "Manual", increase the room
temperature with
ter).
or
■ Press g to select party mode (only
in programs "Prog 1" to "Prog 3";
see page 19).
18
(see next chap-
Terminating the holiday program
■ The holiday program terminates auto-
matically when the end time has
been reached.
■ If you want to delete the holiday pro-
gram early:
1. Open the flap.
2. Press twice.
3. With / select "Holiday".
4. Confirm with OK.
5. With / select "OFF".
If you want an unscheduled reduction
in room temperature:
■ In programs "Prog 1" to "Prog 3"
and "Manual", reduce the room tem-
perature with (see next chapter).
or
■ Press û to select economy mode
(only in programs "Prog 1" to
"Prog 3"; see page 19).
(cont.)