Changing The Room Temperature For A Few Days Only; Setting The Holiday Program - Viessmann VITOTROL 100 Operating Instructions For The System User

Central heating
Setting a permanent room temperature
Disabling time phases
To disable a time phase, set the same
value for the start and stop times.
Copying a time program
You can copy time programs, for exam-
ple to make a new time program from
another where only minor changes are
required.
01. Open the flap.
02. Press twice.
03. With / select "Settings".
04. Confirm with OK.
05. With / select "Programs".
06. Confirm with OK.

Changing the room temperature for a few days only

Setting the holiday program

For when you are away, the following
energy saving options are available:
16
(cont.)
07. Select the program you want to
change with / (e.g. "Prog 1").
08. Confirm with OK.
09. Select "Heating circuit" with / .
10. Confirm with OK.
11. With / select "Copy from".
12. Confirm with OK.
13. With / select the program you
want to copy.
14. Confirm with OK.
15. With / select "Set" to make
changes.
■ You can shut central heating down
completely by selecting frost protec-
tion mode "Frost pr." (see page 13).
or
■ You can set the central heating to min-
imum energy consumption (e.g. to pre-
vent your house plants from being
damaged by the cold). To do so, select
the holiday program "j".
When the holiday program is enabled,
the rooms are heated with the reduced
room temperature ("Reduced").