Changing The Room Temperature For A Few Days Only; Setting The Holiday Program - Viessmann VITOTROL 100 Operating Instructions For The System User

Setting a permanent room temperature
04. Confirm with OK.
05. With / select "Programs".
06. Confirm with OK.
07. Select the program you want to
change with / (e.g. "Prog 1").
08. Confirm with OK.
09. Select "Heating circuit" with / .
10. Confirm with OK.

Changing the room temperature for a few days only

Setting the holiday program

For when you are away, the following
energy saving options are available:
(cont.)
11. With / select "Copy from".
12. Confirm with OK.
13. With / select the program you
want to copy.
14. Confirm with OK.
15. With / select "Set" to make
changes.
■ You can shut central heating down
completely by selecting frost protec-
tion mode "Frost pr." (see page 14).
or
■ You can set the central heating to
minimum energy consumption (e.g.
to prevent your house plants from
being damaged by the cold). For this,
select the holiday program "j".
When the holiday program is ena-
bled, the rooms are heated with the
reduced room temperature
("Reduced").
During the holiday program, you can
change the reduced room tempera-
ture to suit your requirements (see
page 15).
Note
DHW heating is switched off.
Central heating
17