Selecting the operating mode
6. Confirm with OK.
The display shows
temperature.
Setting a permanent room temperature
You can set 3 room temperatures:
■
Standard room temperature "Comfort"
Factory setting: 21 °C
Setting range: 10 to 40 °C
Room temperature "Eco"
■
Factory setting: 19 °C
Setting range: 10 to 40 °C
■
Reduced room temperature "Reduced"
Factory setting: 16 °C
Setting range: 10 to 40 °C
The rooms are heated to one of the 3 room tempera-
tures, in accordance with the active time phase of the
selected time program.
01. Open the flap.
02. Press
twice.
03. Use / to select "Settings".
Changing the room temperature for a few days only
The following energy saving options are available for
times when you are on holiday:
Setting a holiday program
1. Open the flap.
2. Press
twice.
3. Use / to select "Holiday".
4. Confirm with OK.
5. Use / to select "ON".
6. Confirm with OK.
7. Use / to select the required day and time for the
starting and ending of the holiday function.
(cont.)
and again the current room
04. Confirm with OK.
05. Use / to select "Tmp settings".
06. Confirm with OK.
07. Use / to set the required temperature for "Com-
fort".
08. Confirm with OK.
09. Use / to set the required temperature for "Eco".
10. Confirm with OK.
11. Use / to set the required temperature for
"Reduced".
12. Confirm with OK.
You can shut central heating down completely by
■
selecting frost protection mode .
or
■
You can set the central heating to minimum energy
consumption (e.g. to prevent your house plants from
being damaged by the cold). To do so, select the hol-
iday program
. If the holiday program is active, the
rooms are heated to the reduced room temperature
("Reduced").
8. Confirm each respectively with OK.
Terminating the holiday program
■
The holiday program terminates automatically when
the end time has been reached.
■
If you want to terminate the holiday program early:
1. Open the flap.
2. Press
twice.
3. Use / to select "Holiday".
4. Confirm with OK.
Central heating
13