To unpack a CM:
Carefully remove the CM and other items from the shipping box.
1.
You should have the following items:
CM
•
Quick Reference Card for the CM
•
Save the box and packaging materials for possible future repackaging
and shipment.
Remove the CM from the protective bag and place it on top of the bag
2.
in a dry, static-free, dust-free area.
Inspect the shipment for any signs of damage.
3.
2.6 INSTALLING A CM
Only qualified personnel should perform these procedures in
an activated MCC-16. It is recommended that all other
personnel shut down the MCC-16 before installing or
de-installing CMs to eliminate potential damage to the MCC-16
or the potential hazard of electrical shock.
Install a CM into the MCC-16 as follows:
1.
Remove the protection panel from any CM slot in the MCC-16, as
shown in
Figure
(Note that on the first installation of a CM it will be necessary to
remove one of the 8-slot protection panels.)
Ensure that protection panels are fastened to the MCC-16 on
!
slots not occupied by CMs. This reduces safety hazards and
helps prevent problems associated with electro-magnetic
CAUTION
Interference (EMI).
2-6.
INSTALLATION
2-7