Mounting The Mcc-16 In A 19-Inch Rack - Cabletron Systems MCC-16 User Manual

To unpack the MCC-16:
Remove the MCC-16 and other items from the shipping box.
1.
You should have the following items:
MCC-16 Media Conversion Center
•
Grounding wriststrap
•
MCC-16 User's Guide
•
Save the box and packaging materials for possible future repackaging
and shipment.
Inspect the shipment for any signs of damage.
2.

2.3 MOUNTING THE MCC-16 IN A 19-INCH RACK

Follow the guidelines in
installation. Perform these steps to install the MCC-16 in a 19-inch rack:
Mount the MCC-16 into the rack before installing the
MCC-PS(s), power cords, CMs, and cabling. You can more
TIP
easily handle an empty chassis.
Position the brackets of the MCC-16 between the vertical frame
1.
columns of the rack, as shown in
Fasten the chassis securely to the frame columns with the screws.
2.
Figure 2-2 Fastening The MCC-16 To The Rack
Section 2.1 to avoid possible problems during
Figure
8-slot protection panels
INSTALLATION
2-2.
MCC-16
ESD
WRIST STRAP
GROUNDING
RECEPTACLE
2-3