Cabletron Systems MCC-16 User Manual page 55

P1 And P2 LEDs For RI And RO Ports
The P1 and P2 LEDs indicate the status of the RI/RO ports, as described
in Table 4-12.
Table 4-12 P1 And P2 LEDs For RI/RO Ports
Port LED Activity
GREEN
Blinking GREEN
RJ45
RI/RO
Blinking RED
OFF
GREEN
Blinking GREEN
Fiber
RI/RO
Blinking RED
OFF
Meaning
Active (port open).
Autowrap enabled (port wrapped).
Speed-fault condition caused the port to
wrap.
No connection.
Rx connected, fiber key received.
The connection from the upstream device to
the Receive connection is complete but the
port is wrapped.
Speed-fault condition caused the port to
wrap.
No connection.
MCC-DFL SETUP
4-13