MCC-DFL SETUP
4.1 OVERVIEW OF THE MCC-DFL
The MCC-DFL has two independent Fiber Optic Transceivers (FOTs).
Each FOT has an RJ45 and fiber ST port; thus allowing signals
transmitted over the twisted pair to be converted to optical signals for
transmission over multimode fiber and vice versa. The top RJ45 and
fiber ST port (FOT-A) and the bottom RJ45 and fiber ST port (FOT-B) are
on separate rings and do not communicate with each other within the
MCC-16. Communication between FOT-A and FOT-B requires an
external device such as a bridge or router. You can configure any port as
RI, RO, lobe, or station.
configured for station/lobe applications and FOT-B configured for RI/RO
applications.
Switch
MMAC
4-2
Figure 4-2
Station/Lobe Application
Station
RI
Ring In/Ring Out Application
Figure 4-2 Sample MCC-DFL Configuration
shows an MCC-DFL with FOT-A
MCC-DFL
PWR
P1
P2
16 Mb
P
1
F
O
T
TX
Lobe
A
P
2
RX
PWR
P1
P2
16 Mb
TX
RO
P
1
F
O
RX
T
B
P
2
MMAC
MMAC