Chapter 4 Using The Community Names Option; Community Names Screen - Cabletron Systems IRM-2/LM User Manual

Irm2 local management

Table of Contents

USING THE COMMUNITY NAMES OPTION

The Community Names Option allows you to decide the type of access

(Read Only, Read/Write, or Superuser) SNMP workstations have to the

IRM2, and which workstations you want to receive alarms from the

device. You can also change the password or add new passwords to the

device by entering new Superuser names or altering existing Superuser

names.

4.1

To access the Conﬁgure Community Names Screen:

1. Use the arrow keys to highlight the COMMUNITY NAMES option

at the bottom of the DEVICE/BOARD/PORT COUNTERS screen.

2. Press Return. The Community Names Screen, Figure 4-1, appears.

-----------------------------------------------------------------------

Community Name

-----------------------------------------------------------------------

public

ctron

CHAPTER 4

COMMUNITY NAMES

Please note: SU names are local passwords

Access

SAVE

Figure 4-1 Community Names Screen

Traps

Trap IP Addr

0.0.0.0

RETURN

4-1

Table of Contents