Chapter 2 Getting Started; Local Management From A Terminal; Terminal Configurations - Cabletron Systems IRM-2/LM User Manual

This chapter lists procedures for accessing IRM2 Local Management for
the IRM2. Information is provided on required terminal and cable
configurations for connecting to the IRM2's Console port. Information is
also provided on accessing Local Management through a modem.
2.1

LOCAL MANAGEMENT FROM A TERMINAL

To access Local Management for the IRM2, you must attach a VT 200 or
300 series terminal, or terminals running emulation programs for these
series to the 9 pin port labeled CONSOLE on the IRM2.
2.1.1 Terminal Configurations
Use the following terminal configurations requirement to set up for the
local management CONSOLE port. When using a Digital Equipment
Corporation (DEC™) VT 200 or 300 series terminal, press F3 to access
the Setup Directory. When using a terminal emulator, refer to your
equipment user manual for setup procedures.
Display Set-up Menu
Columns
Controls
Auto Wrap
Text Cursor
General Set-up Menu
Mode
Cursor Keys
CHAPTER 2
GETTING STARTED
80 Columns
Interpret Controls
No Auto Wrap
No Cursor
(VT220) VT200, 7 Bit Control
(VT320) VT300, 7 Bit Control
Normal Cursor Keys
2-1