Historical Log Screen - Simplex LT0290 User Manual And Reference Manual

Page 28
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TIME: 10:06:31 PM
DATE: MON 7 DEC 95
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1. Alarms - Display any Current Alarms
2. Isolates - Display any Current Isolates
3. Faults - Display any Current Faults
4. Alarm Historical Log
5. Fault Historical Lob
6. System Functions and Reports
Enter your passcode or ENTER to log out> XXX

4.3.4 Historical Log Screen

The Historical Logs are formatted differently from the CRT Acknowledge Screens. As on
the operator interface panel, the Historical Logs are displayed with any entry number,
followed by a time tag and the actual event.
The Historical Log shows all events in the system log, not just those events annunciated on
the CRT. These screens are not dynamic. They display only historical data.
The view the Historical Log Screens, you must select the type of historical log from the CRT
Main Menu Screen (Figure 8). These options are the Alarm Historical Log and the Fault
Historical Log. Select the desired function either buy placing the screen cursor on the
function name, or by pressing either the <4> key or the <5> key. Then, press the <Enter>
key. A typical ALARM Historical Log is shown in Figure 9.
Document No.: 4100-M004
SIMPLEX 4120 NETWORK FIRE INDICATOR PANEL
4120 F/A SYSTEM
PORT 1 - SECURITY OFFICE
SYSTEM IS NORMAL
4100 FIRE ALARM OPERATOR INTERFACE
MAIN MENU
Figure 8
CRT Log In Screen
June 1997
OPERATOR MANUAL
USER: 1
ACCESS: 1
Issue 1.0