Table of Contents
Advertisement
SIMPLEX 4120 NETWORK FIRE INDICATOR PANEL
OPERATOR MANUAL
6.4
HOW TO ESCAPE FROM MENU
A. Press the <CLR> key. The following will be displayed:
Press <NEXT> or <PREVIOUS> to scroll
Select a List of Points
B. Press the <CLR> key again. The following will be shown:
SIMPLEX AUSTRALIA
22:05:10
6.5
POINT CONTROL WITH THE FUNCTION KEY
Many of the functions performed from the front panel will control point-specific data. The
user of the panel can control points using the <FUNC> key.
The <FUNC> key enables the user to view additional status information concerning the point
currently displayed on the alphanumeric display. The point selected on the alphanumeric
display can be manually entered through the ENTRY keypad, or may be the point displayed
because of an abnormal condition. Definitions for a function key or several function keys
may be shown in the alphanumeric display. Extended controlling actions are also available
with the following:
A. Clear Verification Tallies
B. Clear Alarm Tallies.
C. Set Control Priorities.
D. Display Analog Timer/Counter Values.
E. Flash the Fault LED on the daughter card.
To select an extended controlling action, the user must first select a point, press the
<FUNC> key, then press the <ENTER> key. One of the extended actions (see list above)
will then appear on the top line of the alphanumeric display as shown below:
MONITOR POINT 1, ZONE 1
FIRE MONITOR ZONE 1
AFTER <FUNC> KEY PRESS
F1= Clear Verification Tally
FIRE MONITOR ZONE UNVERIFIED=6
Document No: 4100-M004
SYSTEM IS NORMAL
SUN 01 MAY 95
June 1997
Page 35
AZF1
NORMAL
Issue 1.0
Advertisement
Table of Contents
