Table of Contents
Advertisement
SIMPLEX 4120 NETWORK FIRE INDICATOR PANEL
OPERATOR MANUAL
A complete listing of system points is located within the Programmer's Report. Each system
point has an associated Custom Label which identifies a specific location within the building.
Pseudo points have Custom Labels which identify their purpose.
6.8
HOW TO DISPLAY MAPNET II
Shown below is an example of a Programmer's Report entry describing a MAPNET II
2: M1-2
3RD FLOOR EAST WING
The "2:" portion of the address identifies the owning node. The "M1" identifies the MAPNET
®
II
card or Channel; the "-2" identifies the device. The custom label is "3RD FLOOR EAST
WING, ROOM 13". When entering MAPNET II
separate the channel from the device.
To display the status of the above MAPNET II
1.
Enter the network node number. (See "How to Enter a Prefix".)
2.
Press the <MAP> key (key 6). The alphanumeric display prompts the operator for a
®
MAPNET II
Point Address input as shown below.
Please input Channel-Device (C-DDD)
NETWORK: 2:M
NOTE: The display shows (C-DDD). "C" is the MAPNET II
"DDD" is the device number (1 to 127).
3.
Use the ENTRY keypad to enter the MAPNET II
press the <ENTER> key. The alphanumeric display shows the MAPNET II
and its custom label as shown below.
3RD FLOOR EAST WING
FIRE MONITOR ZONE
4.
Press the <FUNCTION> key as required to display additional point status information.
NOTE: Any system point may be viewed on the alphanumeric display using the above
procedure.
Report to identify the required point address. Enter the required point address.
Press the <FUNCTION> key to display information about the point you
entered.
An example of the Programmer's Report is shown in Figure 18.
Document No: 4100-M004
®
POINT STATUS
®
Press the required Prefix keys;
June 1997
ROOM 13
®
Zone Names, a hyphen must be used to
point, perform the following.
®
channel (1 to 9, and 0);
®
Point Address, such as M1-2, then
ROOM 13
NORMAL
then, use the Programmer's
Page 41
®
point.
ALARM
MBZAM
®
point status
Issue 1.0
Advertisement
Table of Contents
