Page 6
1.3.1.1 Access Level Log-In Procedure
To Log on, perform the following procedure.
1.
Obtain the appropriate passcode information.
2.
Open the interface panel access door.
3.
Press the <MENU> key on the DISPLAY/ACTION keypad on the right side of the
interface panel. The following is displayed.
Press <NEXT> or <PREVIOUS> to scroll
Change Access Level?
4.
Press the <ENTER> key on the DISPLAY/ACTION keypad the following is displayed.
F1=Login
CURRENT ACCESS LEVEL = 1
5. Press the <F1> key (above the alphanumeric display). The display shows the
following.
Enter a Passcode followed by <ENTER>
6.
Enter the passcode. Press the <ENTER> key on the Entry keypad. For security
reasons, an "X" is displayed for each digit of your passcode, as shown below.
Enter a Passcode followed by <ENTER>
XXX
If the passcode is correct, the following is shown.
Enter a Passcode followed by <ENTER>
ACCESS GRANTED
Document No.: 4100-M004
SIMPLEX 4120 NETWORK FIRE INDICATOR PANEL
F2=Logout
June 1997
OPERATOR MANUAL
Issue 1.0