Crt Function Key Definitions; Set-Up Procedure; Crt Screen Displays - Simplex LT0290 User Manual And Reference Manual

SIMPLEX 4120 NETWORK FIRE INDICATOR PANEL
OPERATOR MANUAL
• Log In
• Log Out
• Acknowledge Condition Changes
• Perform System Reset Procedures
• View and Print Historical Logs
• view Current Abnormal Conditions
• Perform Alarm Silence Procedures
• Print TrueAlarm

4.2.1 CRT Function Key Definitions

The Function Keys on the CRT keyboard are used to control the various system operations.
Table 2 defines the various keys and their uses.
FUNCTION KEY
F2
F3
F18
F19
PF1
PF2
PF3
PF4
CTRL W

4.2.2 Set-Up Procedure

The CRT must be set up[ correctly in order to receive and transmit data. An operator may
enter the set-up mode to verify proper configuration.
performed by Simplex personnel and should not normally be performed by operators. (See
publication FA4-11-224 for CRT set-up parameters.)
4.3

CRT SCREEN DISPLAYS

A variety of CRT screen displays are used to support system operations.
information is displayed on the first three lines of the screen. The first line shows the time
on the left, custom banner in the centre, and the operator on the right side of the screen.
The second line shows the date on the left and the current access level on the right. The
third line shows the overall system status. Prompt/Message information is shown on all
screens. The bottom line displays prompts, help messages, and error messages.
Document No: 4100-M004
TM
Reports
Table 2
Function Key Definitions *
DEFINITION
Print Screen
(Printer Required)
Set-Up
Main Menu
Historical Log Menu
Acknowledge Key
Alarm Silence
System Reset Key
Log In/Log Out Key
Refreshes Current Screen
However, set-up procedures are
June 1997
Page 25
Header
Issue 1.0