Starting Corewatch From Within Hp Openview 5.X - Cabletron Systems SmartSwitch 6000 Installation & User Manual

Advanced router module

Hide thumbs Also See for SmartSwitch 6000:

Table of Contents

Starting CoreWatch

Starting CoreWatch from within HP OpenView 5.x

HP OpenView 5.x is network node management software for the Solaris and Windows NT

environments. If HP OpenView is integrated with CoreWatch, you may use HP OpenView to start

CoreWatch and recognize your SmartSwitchs. HP OpenView is automatically integrated with

CoreWatch when you install CoreWatch while the HP OpenView daemon is running.

To start CoreWatch from within HP OpenView:

Start HP OpenView.

Click a network node.

Select the Misc menu and then choose CoreWatch. The Login Dialog dialog box appears.

Type the name or IP address and community string for the SmartSwitch. If you do not know

this information, see your network administrator.

Click OK.

4-6

Installing and Starting Cabletron CoreWatch

Table of Contents

Do you have a question about the SmartSwitch 6000 and is the answer not in the manual?

6ssrm-02