Line Cards; 10/100Base-Tx Line Card - Cabletron Systems SmartSwitch 6000 Installation & User Manual

Advanced router module
Hide thumbs Also See for SmartSwitch 6000:
Table of Contents

Advertisement

Hardware Overview

Line Cards

The following Line Cards can be installed in the 6SSRM-02:
6SSRLC-TX
6SSRLC-FX
6SSRLC-SX
6SSRLC-LX
6SSRLC-LX70
6SSRLC-SER
6SSRLC-SERC
6SSRLC-SERCE
Note: Due to a power restriction with the SmartSwitch 6000, the 6SSRM-02 can only support one
linecard when either 6SSRLC-FX or 6SSRLC-TX is installed. Any other combination of two
linecards is fully supported in the SmartSwitch 6000.

10/100BASE-TX Line Card

The 10/100BASE-TX line card contains eight independent Ethernet ports. Each port senses
whether it is connected to a 10-Mbps segment or a 100-Mbps segment and automatically
configures itself as a 10Base-T or 100Base-TX port.
10/100BASE-TX line card.
1-12
Introduction
Figure 1-2 Front Panel of 10/100BASE-TX Line Card
8-port 10/100BASE-TX
8-port 100BASE-FX
2-port 1000BASE-SX
2-port 1000BASE-LX
1-port 1000BASE-LLX (70 KM)
2-port serial
4-port serial with compression
4-port serial with compression and encryption
Figure 1-2
shows the front panel of the

Advertisement

Table of Contents
loading

This manual is also suitable for:

6ssrm-02

Table of Contents