Chapter 2 Installation - Cabletron Systems SmartSwitch 6000 Installation & User Manual

This chapter provides the instructions to install the 6SSRM-02. A Phillips screwdriver is required
to install options into the module. Follow the order of the sections listed below to correctly install
the module.
• Unpacking the Module
• Installing Options
• Installing the Module into the 6C105 Chassis
• Connecting to the Network
• Completing the Installation
Warning: Only qualified personnel should install the 6SSRM-02.
Note: Read the Release Notes shipped with the module to check for any exceptions to the
supported features and operation documented in this guide.
Installation
Installation
2
2-1