Important Notice - Enterasys SmartSwitch 2200 Management Supplement

The firmware in the SmartSwitch 2200 standalone devices and SmartSwitch 6000 modules has
been revised up to 3.10.xx and 3.11.xx. This document provides the following changes and
additions to the 802.1Q VLAN User's Guide (9032599-03) as a result of both firmware revisions.
Information in this guide refers to firmware version 3.x and 4.x only. It does not refer to firmware
version 5.x.
This guide applies to 2X2XX, 6X2XX, and 6X3XX Ethernet switch devices only.
Changes Due to Revision 3.10.xx
•
A replacement drawing for the 802.1Q VLAN Screen Hierarchy in the user's guide that shows
the screens of the hierarchy that were affected.
•
Descriptions of the new VLAN Classification Configuration screen and the Protocol Port
Configuration screen, which replace the current descriptions of the Protocol VLAN
Configuration screen and the Protocol Port Configuration screen, respectively. Also included is
information about protocol Classification Preference Rules.
•
A revised Example 4 and two new examples (5 and 6), which show how the new screens can be
applied to configure a network.
Change Due to Revision 3.11.xx
The procedure was changed to mark and delete one or more line items in the VLAN Classification
Configuration screen.

IMPORTANT NOTICE

Introduction
Introduction
1
1-1