Appendix A: Upgrade And Reset; Overview - Enterasys RoamAbout AP-2000 Hardware Installation Manual

Overview

This appendix describes how to upgrade the RoamAbout R2 firmware using the console
port or AP Manager. It also describes how to reset the R2 to all factory defaults.
Check the Enterasys Networks Wireless web site for the latest RoamAbout AP Manager
and firmware. Go to
Download Library to download the latest AP Manager and RoamAbout R2 firmware.
The AP Manager contains the firmware and Boot ROM image files. Refer to the AP
Manager release notes for the instructions to install the AP Manager.
www.enterasys.com/products/wireless
Caution: If the power is interrupted during the upgrade or reset back to factory
defaults process, the image in your device will become corrupt. Do not turn off or
perform any action that can cause power loss during an upgrade.
Precaución: Si se corta la electricidad durante el proceso de actualización o se
reajusta de nuevo al funcionamiento determinado por el fabricante, se alterará la
imagen del aparato. No corte la corriente ni realice ninguna operación que pueda
ocasionar una interrupción de suministro eléctrico durante el proceso de
actualización.
RoamAbout R2 Wireless Access Platform Hardware Installation Guide A-1
Upgrade and Reset
and click on the Software
A