F Upgrade And Reset - Enterasys RoamAbout R2 Installation Manual

This appendix describes how to upgrade the RoamAbout R2 firmware using the console
port, AP Manager, or the web-based management. It also describes how to reset the R2 to
all factory defaults.
Check the Enterasys Networks Wireless web site for the latest RoamAbout AP Manager
and firmware. Go to www.enterasys.com/wireless and click on the Software Download
Library to download the latest AP Manager and RoamAbout R2 firmware. The AP
Manager contains the firmware and BootROM image files. Refer to the AP Manager
release notes for the instructions to install the AP Manager.
CAUTION: If the power is interrupted during the upgrade or reset back to
factory defaults process, the image in your device will become corrupt. Do not
turn off or perform any action that can cause power loss during an upgrade.
Appendix F
Upgrade and Reset
F-1