Enterasys RoamAbout AP-2000 Hardware Installation Manual page 53

11. Choose Wireless Configuration from the Main Menu, then choose Set/Show
Wireless Configuration.
12. At the top of the screen, select the radio slot (1 or 2) to configure.
13. Enter the name of the wireless network.
14. Enter a channel. The channels vary, depending on country regulations. In a wireless
client configuration (Workgroup bridge mode) with multiple APs, adjacent APs
should be set to different channels that are at least five channels apart.
15. Enter a station name. This name is displayed when clients run the RoamAbout Client
Utility. Each RoamAbout R2 should have a unique station name.
16. Set the Reset Option to Reset Card if necessary (the default setting).
17. Choose Save.
.
RoamAbout R2 Wireless Access Platform Hardware Installation Guide 4-3
Using the Console Port