Using The Roamabout Ap Manager - Enterasys RoamAbout AP-2000 Hardware Installation Manual
Wireless access platform
Hide thumbs
Also See for RoamAbout AP-2000:
- Networking manual (202 pages) ,
- Hardware installation manual (60 pages)
Table of Contents
Advertisement
Using the RoamAbout AP Manager
1.
Select the RoamAbout R2 that you want to upgrade from the RoamAbout AP
Manager Managed List.
2.
Click the Reload button on the Main window.
3.
Select one of the following:
• Use this Computer
The firmware image is on the same computer and in the same directory as the AP
Manager, which uses the NetRider Loader application to load the image. You
need to specify the image file name in the Firmware Image File field. You can use
the Browse button to search for the file name.
• Use Remote TFTP Server and enter the IP address of your TFTP server
With this option enabled, the AP only loads the image from the TFTP server
whose IP address is specified in the TFTP Server Address field. You need to
specify the image file name in the Firmware Image File field. You should use this
option when you are managing APs on a different subnet than the computer with
the AP Manager.
4.
Select one of the following:
• Operational Firmware (for firmware upgrades)
• BootROM (for Boot ROM upgrades)
5.
Browse to the directory where you installed AP Manager, or enter the complete path
to the upgrade file.
6.
Select the latest G*.Z file for firmware upgrades, or B*.BIN file for Boot ROM
upgrades.
7.
Click on Open.
8.
Click on the Reload Now button. NetRider Loader starts.
9.
Click Yes to confirm the upgrade, then click OK to reconfirm the upgrade.
10. AP Manager displays a Poll dialog box that prompts you to poll the RoamAbout R2.
Polling the RoamAbout R2 lets you know when the upgrade is complete.
Caution: Use the Poll dialog box to determine when the upgrade is complete. The
NetRider Loader application only indicates when the file copy is completed, it does
not indicate when the upgrade is complete.
Precaución: Utilice el cuadro de diálogo de Poll para determinar cuándo se ha
completado el proceso de actualización. La aplicación NetRider Loader sólo indica
cuándo se ha acabado de copiar el archivo; no indica cuándo se ha acabado el
proceso de actualización.
RoamAbout R2 Wireless Access Platform Hardware Installation Guide A-3
Upgrade Firmware
Advertisement
Table of Contents
