Completing The Installation - Enterasys Matrix E5 5H152-50 Installation Manual

Completing the Installation

Figure 3-16 Fiber Port LED Designations
If a link has not been established, refer to
"Getting Help" in About This Guide for details on contacting Enterasys Networks if a problem
persists.
3.7 COMPLETING THE INSTALLATION
After installing the module and making the connections to the network, proceed as follows:
1. If the chassis is installed in a rack that has strain-relief brackets, secure the cables by running
the cables along the strain-relief bracket and tying them to the bracket using cable ties.
2. The module is now ready to be configured through Local Management. Refer to the MATRIX
E5 Series Modules Local Management User's Guide for information on how to access and use
Local Management. For details on how to get manuals, refer to the
section in About This Guide.
3-26
Chapter 4 for LED troubleshooting details. Refer to
"Related Documents"