This guide provides an overview, installation and troubleshooting instructions, and
specifications for the Enterasys Matrix
DFE‐Platinum 7H4202‐72.
For information about the CLI (Command Line Interface) set of commands used to
configure and manage the DFE‐Platinum module, refer to the Enterasys Matrix
DFE‐Platinum Series Configuration Guide.
Depending on the firmware version used in the DFE-Platinum module, some features described in
this document may not be supported. Refer to the Release Notes shipped with the DFE-Platinum
module to determine which features are supported.
Who Should Use This Guide
This guide is intended for a network administrator responsible for installing and setting
up the DFE‐Platinum module.
Note: In this guide, DFE-Platinum module, unless otherwise noted, refers to the
7H4202-72.
Electrical Hazard: Only qualified personnel should perform installation procedures.
Riesgo Electrico: Solamente personal calificado debe realizar procedimientos de
instalacion.
Elektrischer Gefahrenhinweis: Installationen sollten nur durch ausgebildetes und
qualifiziertes Personal vorgenommen werden.
About This Guide
®
DFE (Distributed Forwarding Engine) module,
Important Notice
DFE-Platinum Series Hardware Installation Guide xiii