Time Menu - Strong SRT 32HB4003 User Manual

5.4.4 ATV Manual Tuning (in DVB-C mode only)
First select the source type of ATV. Then in the Channel menu, select ATV Manual Tuning and press OK to
access. Highlight and press pq to select Storage To 1 (maybe other number), Sound System and Channel
No.. Then select search and press OK to start the search. Press u for the unit to search towards higher
frequency. Press t for the unit to search towards lower frequency. The search stops when a programme
is found and this programme will be stored in the current channel position. If you want to stop the
search, press MENU.
Current CH
Colour System
Sound System
Fine-Tune
Search
5.4.5 Channel extra settings
Programme Edit
Signal Information
Cl information
Channel list
Schedule List
Software Update (USB)
NOTE:
To move a channel, select it by using pq or CH +/- button then press YELLOW button. Now, there are
two different ways to move the channel:
Enter the number of the new position by using the 0 ~ 9 buttons on the remote control and confirm with
OK or YELLOW. The selected channel will be automatically moved to the new position.
Press pq button and move the channel in a position of your choice. Confirm with OK

5.5 Time menu

Press MENU to display the main menu. Press t u to select TIME in the main menu. Press p q to do
further adjustments. Press OK to return to the previous menu.
Clock
12
Set the channel number
Select the colour system (Available: AUTO, PAL, SECAM)
Select the Sound system
Adjust the frequency of the channel
Start the channel search
Edit the programmes. You can press the COLOUR BUTTONS on the remote
control to skip programmes, rename and delete programmes or move
programmes, and add programmes to the favourite list by pressing FAV.
Showing the information of current DTV channel. Only available with DTV
signal.
Enables the user to watch and change settings of CAM modules and check
values from inserted smart card.
Select which channel list you like to see if you press on LIST button. Select
between Main List or Favorite List
Press pq in the Channel. Select Schedule List, then press OK to enter the sub-
menu. Use the COLOUR BUTTONS to modify your settings.
Press OK and use t u to select Yes if you want to update the software or No
to go back to the main menu. For more information see also chapter 6.2.5.
To modify the order of the channels contained in the channel list do as
follow: press Menu and OK to select Program Edit (it is also possible access
this option by pressing PROG button on the remote control).
The time is automatically obtained from the channel transmission and
doesn't have to be set manually. Should this function not be provided by the