Installation - Havis DS-DELL-400 Series Owner's Manual

Installation

1) Remove the Mounting Bracket from the packaging. Install the
Mounting Bracket to the Motion Device using (4) 1/4"-20 x 5/8" long
screws (Hardware Kit Item 3). Torque screws to 80 in-lbs (9.0Nm) ± 10%.
NOTE: Numerous hole patterns present in Mounting Bracket will accomodate Havis Motion
Devices as well as most competitors'
NOTE:
2) Lower the Docking Station to the Mounting Bracket as shown and secure
with (4) 1/4"-20 x 5/8" long screws (Hardware Kit Item 3). Torque screws
to 80 in-lbs (9.0 Nm) ± 10%.
6
We recommend applying a drop of medium strength (blue)
thread locking adhesive to the threads of all fasteners.
1/4"-20 Screws
Mounting Bracket
Typical Motion Device Example
(not included)
1/4"-20 Screws