NetComm Videotron 3G39W-V User Manual page 30

WPS
WPS is the simplest way to establish a connection between wireless clients and your 3G39W-V. This method removes the need to
manually select the encryption mode and fill in the passphrase. You only need to press a button on both wireless client and the
3G39W-V, and the WPS will do the rest for you. The 3G39W-V supports two types of WPS:
OPTION
you have to push a specific button on the wireless client or in your wireless client utility to start the WPS mode. Then
WPS via Push Button switch the 3G39W-V to WPS mode. You can simply push the WPS button of the wireless router, or click the 'Apply'
button in the web configuration interface.
you have to know the PIN code of the wireless client and switch it to WPS mode, then input the wireless client PIN to
WPS via PIN code
the 3G39W-V web interface.
Use the drop box to either enable or disable the WPS function.
OPTION
Status:
SSID:
WPS Auth Mode:
WPS PIN:
WPS Mode:
YML39W-VX
www.netcomm.com.au
Table 21 - Advanced View - Enable or Disable WPS
Figure 29 - Advanced View - WPS Settings - Disabled
Figure 30 - Advanced View - WPS Settings - Enabled
If the wireless security (encryption) function of this wireless router is properly set, you will see a 'Success' message
here. Otherwise, you will see 'Idle'.
This is the network broadcast name (SSID) of the router.
It shows the active authentication mode for the wireless connection.
This is the WPS PIN code of the wireless router. You may need this information when connecting to other WPS-
enabled wireless devices.
Select either PIN mode or PBC (which is the WPA via Push Button).
Table 22 - Advanced View - WPS Settings
DEFINITION
DEFINITION
Videotron – 3G39W-V
3G39W-V User Guide
30