NetComm Videotron 3G39W-V User Manual page 21

PPTP
This connection type enables the 3G39W-V to connect to a VPN server via a bridged WAN device. Any device connected to the
3G39W-V can then access the VPN based resources available.
NAME
Server IP
User Name/Password
Address Mode
Operation Mode; There are 3 options:
'Always On'
'On Demand'
'OFF'
Mac Clone
NAT Configuration
Please refer to the WAN Failover Backup section on page 22 for information on configuring the WAN failover feature.
Click 'Apply' to save the settings.
3G39W-V User Guide
21
Figure 17 - Advanced View - WAN - PPTP Settings
Type in the server IP address assigned by your Internet Service Provider.
Type in the username and password assigned by your provider.
Select Dynamic if your service uses a DHCP server, or select Static and type in the IP address, Subnet Mask and Default
Gateway assigned by your Internet Service Provider.
Keeps the Internet connection alive, does not disconnect.
Only connects to Internet when there's a connection attempt
Only connects to the Internet when the 'Connect' button on this page is pressed, and disconnects when the
'Disconnect' button is pressed.
Please input the MAC address of your computer here if your service provider only permits computers with a certain MAC
address to access the Internet. If you are using a computer which used to connect to the Internet via a cable modem,
you can simply press the 'Default' button to fill the MAC address field with the MAC address of your computer.
Enable or disable Network Address Translation for this connection type
Table 15 - Advanced View - WAN Settings - PPTP
DESCRIPTION
YML39W-VX
www.netcomm.com.au